Hook Lift Containers

Rectangular Style Hook Lift Containers

Rectangular Hook lift containers typically range in size from 5 – 50 Yd. and can be built with Light Duty, Standard Duty or Heavy Duty Specifications or customized to fit your needs.

TFI can produce Hook lift containers to fit any make or model of Hook Lift Hoist on the market today with specs. such 6” x 2” x ¼” Tube A-frame, 7 ga. Gussets & Solid Hot Rolled Round bar Hook pins, Hook lift containers are built to perform under the most extreme conditions.

Typical Hook Lift pin heights are 33”, 36”, 54” & 62”, and all TFI Hook lift containers come with rear hold downs set per manufacturers spec.

Thompson Fabricating is the ONLY manufacturer to fabricate Rectangular Containers with the MULTI-PURPOSE ROLLED BOTTOM. With this unique design we can be sure that TFI containers will provide years of worry-free service.

TFI containers can be easily detected out on the job site or on the street. All TFI Rectangular containers are built with the ROLLED BOTTOM on the sides of the containers, making for one tough container and at no additional cost to the customer.

The main benefit of the ROLLED BOTTOM is that the radius prolongs the life of the container by protecting the side posts on the outside of the container from rust. The vertical side posts on a roll off container are normally the first place to rust as water, condensation, dirt and ice get in behind the post and rust it from the inside out. With the ROLLED BOTTOM, constant airflow occurs behind the posts.

Water or condensation building up behind the posts dries while the container sits on the jobsite, or while in transit, thus preventing the side post from rusting on the bottom.

Along with preventing side post rust, the ROLLED BOTTOM also has other benefits, such as:

  • Giving the wall a wider base for added strength and stability
  • Acting as an interior gusset allowing easier dumping of materials out of the container
  • Extends the life of the container
  • NO ADDITIONAL COST

Light Duty Rectangular Hook Lift Containers
Standard Duty Rectangular Hook Lift Containers
Heavy Duty Rectangular Hook Lift Containers
Rolled Bottom
Standard TFI Color Chart
TFI Rectangular Size Chart

Rectangular Hook Lift Container Rectangular Hook Lift Container Rectangular Hook Lift Container Rectangular Hook Lift Container


Bath Tub Style Hook Lift Containers

Bath Tub Style containers can range in size from 5 – 40 Yd. and can be manufactured with Standard Duty or Heavy Duty specifications and can also be customized to your needs.

Depending on your chosen spec. Bath Tub Style containers can be used to haul a wide variety of material from light debris from home clean outs to, light construction material that can be loaded by hand into the container or by choosing the Heavy Duty options the Bath Tub Style containers can easily handle the abuse of Backhoes and Excavators on the job site.

Bath Tub Style containers are considerably lighter in weight when compared to Rectangular Containers they can also be nested to maximize shipping cost because they are built 4” narrower in the front which will also allow for easier dumping of packed in material and another benefit for many haulers is that the side walls provide a large area for advertisement purposes.

TFI can produce Hook lift containers to fit any make or model of Hook Lift Hoist on the market today with specs. such 6” x 2” x ¼” Tube A-frame, 7 ga. Gussets & Solid Hot Rolled Round bar Hook pins, Hook lift containers are built to perform under the most extreme conditions.

Typical Hook Lift pin heights are 33”, 36”, 54” & 62”, and all TFI Hook lift containers come with rear hold downs set per manufacturers spec.

Standard Duty Bath Tub Hook Lift Containers
Heavy Duty Bath Tub Style Hook Lift Containers
Standard TFI Color Chart
Standard Bath Tub Style Size Chart

Bath Tub Style Hook Lift Container Bath Tub Style Hook Lift Container Bath Tub Style Hook Lift Container Bath Tub Style Hook Lift Container