| Front & Rear Load Containers
TFI is pleased to announce that we are
once again
manufacturing Front & Rear Load Containers.
These containers are available in two different specifications, the TFI Original
and also the New Competitor Series spec. or we can build to your specifications.
REAR LOAD CONTAINER SIZES
|
DEPTH |
WALL
HEIGHT |
WIDTH |
1 CU. YD. |
25" |
38" |
60" |
1.5 CU. YD. |
28" |
40" |
60" |
2 CU. YD. |
38" |
40" |
60" |
2 CU. YD. Slope |
52" |
40" |
60" |
3 CU. YD. |
76" |
40" |
60" |
4 CU. YD. |
84" |
48" |
60" |
6 CU. YD. |
120" |
48" |
60" |
8 CU. YD. Low Profile |
156" |
48" |
60" |
8 CU. YD. High Profile |
120" |
61" |
60" |
FRONT LOAD CONTAINER SIZES
|
DEPTH |
WALL
HEIGHT |
WIDTH |
2 CU. YD. |
40" |
40" |
72" |
3 CU. YD. |
48" |
48" |
72" |
4 CU. YD. |
54" |
48" |
72" |
6 CU. YD. w/ side doors |
72" |
60" |
72" |
8 CU. YD. w/ side doors |
72" |
72" |
72" |
8 CU. YD. slant |
84" |
66" |
72" |
COMPETITOR SERIES CONTAINERS SPECS.
• 10 ga. floors w/ 3/4" drain plug
• 10 ga. skids
• 12 ga. sides, front and back sheets
• 12 ga. top rails
• 12 ga. lid trays
• 10 ga. gussets
•10 ga. bumper plates & top gussets (front load only)
• 7 ga. pockets (front load only)
• 1 1/2" solid trunnion bars (rear load only)
• Solid welded inside
• Dura flex single wall lids
• Painted any standard TFI color
TFI ORIGINAL CONTAINERS SPECIFICATIONS
• 10 ga.. floors, w/ 3/4" drain plug
• 10 ga. skids
• 10 ga. sides, front and back sheets
• 10 ga. top rails
• 10 ga. lid trays
• 7 ga. gussets
• 7 ga. bumper plates & top gussets (front load only)
• 7 ga. pockets (front load only)
• 1 1/2" solid trunnion bars (rear load only)
• Solid welded inside
• Dura flex single wall lids
• Painted any standard TFI color
STANDARD COLOR CHART |
