Receiving Containers

RECTANGULAR or OCTAGON

RECTANGULAR SPECIFICATIONS

FLOORS
• 3/16" (7 ga.) floor sheets (2 pieces)
• 16" centered crossmembers (3" x 4.1# channel)
• 2" x 6" x 1/4" main rails
• 2 - 8" x 10" rear wheels with grease fittings
• 2 - 8" x 6"   front wheels with grease fittings
• 2 - 4" x 6" solid steel nose rollers with grease fittings
• 1 3/8" (A-36) steel hook inserted through 3/4" hook plate

SIDES
• 10 Ga. steel with roll on bottom
• 12 Ga. 4 - way bent side post back 10' on 12" centers, remainder on 24" centers
• 7 Ga. back post   w/   3/4" x 24" x 10" bracket
• 18" up to bottom w/ 3" x 6" hole for binder connection
• 3" x 4" x 3/16" top rail
• 3 - latches on drivers side of container sides set up 10" narrower in front of container

FRONT ENDS
• 10 Ga. steel 10" narrower than outside width
• 2 - 12 ga. 4 – way bent post
• 3" x 4" x 3/16" top rail
• 18" x 26" 7 Ga. push plate

TAILGATES
• 10 Ga. steel
• 3" x 4" x 3/16" side tubes
• 3" x 4" x 3/16" crosspost
• 1 1/4" latch & door fork pins thru 3" x 4" tubes & fully welded both sides
• 3 – hinges on passenger side of container
• 46 1/2" x 64 1/2" hole in tailgate for compacting unit connection

ROOFS
• 10 Ga. steel
• 10 Ga. 4 – way bent post aligned with side post

PAINT
Waterborne Industrial enamel (wide variety of standard colors)

OCTAGON SPECIFICATIONS
(with cable hook up)

FLOORS
• 3/16 (7 ga.) floor sheet
• 16" centered crossmembers ( 3" x 4.1# channel)
• 2" x 6" x 1/4" main rails
• 2 - 8" x 10" rear wheels with grease fittings
• 2 - 8" x 6" front wheels with grease fittings
• 2 - 4" x 6" solid steel nose rollers with grease fittings
• 1 3/8" steel bull nose & hook
• 3/4" steel hook plate

SIDES
• 7 Ga. steel
• 3" x 6" x 1/4" tubing frame around rear of container to mount tailgate to
• 3" x 6" hole for binder connection 18" up from top of floor
• 3 - latches on drivers side of container

FRONT ENDS
• 7 Ga. steel
• 2 - 3" x 4" x 3/16 " top rail
• Full dog box on the inside of container

TAILGATES
•7 Ga. steel
• 3" x 4" x 3/16" side tubes
• 3" x 4" x 3/16" crosspost
• 1 1/4" latch & door fork pins thru 3" x 4" tubes & fully welded both sides
• 3 - hinges on passenger side of container
• 46 1/2" x 64 1/2" hole in tailgate for compacting unit connection

ROOFS
•7 Ga. steel

PAINT
•Waterborne Industrial enamel (wide variety of standard colors)